Bespoke made to order
Contact for lead times
Full design customisation
Product
details
GRASSHOPPER MK2
The Grasshopper Mk2 - its updated version - stays true to its classic roots while adding enhanced comfort, an extraordinary look, and a lot of new details!
Compatible with all LittleCloud wings, enhancing their handling and performance to the fullest!
SIZE | SMALL | MEDIUM | LARGE |
WEIGHT | 2.4kg | 2.6kg | 2.8kg |
VENTRAL | 420mm | 435mm | 450mm |
RESERVE VOLUME | 2.5-4L | 2.5-4L | 2.5-4L |
PILOT HEIGHT | 150-165cm | 165-185cm | 180-195cm |
MAX. PILOT WEIGHT | 100kg | 100kg | 100kg |
CERTIFICATION | EN-100Kg | EN-100Kg | EN-100Kg |
KEY FEATURES
Balanced Behaviour
The geometry offers a neutral behavior of the harness; it responds to your inputs or the ones from the airmass without amplifying or dampening them. This makes it really safe and reassuring.
The pod harness is 100% suitable for a first experience!
Control during take-off or landing (seated position) is particularly effective and reassuring!
Practical Design & Storage
The harness offers plenty of storage, including:
large rear pocket
under-seat container
2 lycra pockets to store your radio and/or a power bank
2 large side pockets, which are now closed with a zip.
It’s super simple to adjust — shoulders, backrest angle, seat angle, and 4 knots for the footplate.
Improved Efficiency
The fairing (tail fairing) improves aerodynamic efficiency without any compromise. It inflates quickly thanks to its 2 side scoops.
We’ve added an inflated nose, as too many pilots were bothered by the flat nose!
Durable, Comfortable & Light
In size L, the set weighs only 2.8kg, including: approved inflatable protection, Edelerid Foras carabiners and rescue container.
For the Grasshopper Mk2.0 version, we've used denser foams to the 3D back to provide exceptional support, long flight comfort and durability for such a lightweight harness.
After months of testing in demanding conditions in Brazil, we can confirm that no sacrifice has been made in the strength/durability of the materials we've used! More than that, we’ve reinforced all the high stress points in this Mk2 version.
Safety Considerations
Harnessing in 2 actions. This harness is equipped with a buckleless system. The front container is located on the chest strap, with the rescue risers attached directly to it. This system allows harnessing in 2 actions with rescue included - unparalleled in terms of safety, and unique on the market.
Strap in made easy. It is almost impossible to forget to strap in, with the reserve hanging in the legs if you are not correctly harnessed.
Low risk of unexpected opening. The front container has a large opening on the top, via 6 needles. The opening movement is thus reduced, and the risk of unexpected opening is really low! It’s now easily removable.
Inflatable protection. This offers very good results in terms of damping (35G), but also in terms of folding compactness. It inflates in a few exhalations or via the electric pump.
Visibility. Colour: Sand/Orange for maximum visibility
Certified. This harness is certified according to standard EN 1651/EN 12491.
Max. weight. Maximum pilot weight is 100kg.
*Why mount the reserve at the front, on the main risers?
It’s a pragmatic choice we’ve made since our very first harnesses.
Decisions around the reserve are ultimately a personal matter — a successful throw is never a guarantee of getting out of trouble.
Here’s why we decided on this setup :
The handle stays within the pilot’s field of view and can be pulled with either hand.
The reserve can be thrown to either side without disturbing the routing of its risers. With a shoulder-mounted reserve, there’s effectively a choice to make about which side that routing takes — which, in the event of a line-over, can make full deployment impossible.
In a mirror deployment, the pilot doesn’t end up lying on their back, since the reserve and the main wing share the same attachment point — no lever effect.
BUTTERFLY V2
The ButterFly is LittleCloud light seat.
There are plenty of super light string harnesses on the market and we’ve decided to refocus the purpose of the Butterfly toward long flight comfort, especially when soaring!
About Butterfly V2
Made with durable materials
Available in 2 sizes, weighing 720/750 grams
Large expandable pockets under the thigh padding.
Ultra comfortable!
Edelrid automatic strap buckle for secure adjustment
Edelrid Foras carabiners
Low waist belt offering added stability and comfort during take-off and buckle-free system
Compatible with a speed bar, equipped with 4 friction rings
KEY FEATURES
Strapless Harness
The geometry has been redesigned with lower hang points, lower waist strap - strapless. This strapless design promotes greater freedom of movement.
Incredible Control
With more rigidity on the back and the leg padding, the legs splitting has been emphasised to offer optimal weight shift control over your wing for incredible precision! Low attachment points also offer enhanced control.
Low Volume
As you can imagine, the ButterFly V2 is a perfect harness for soaring hours on the dunes, but not only that! Its low volume allows it to be a good companion for your hike and flies!
TECHNICAL DETAILS
Geometry inspired by the turtle, stable and precise.
Dyneema structure, buckle free, closing using the main carabineers.
Equipped with 2 small pulleys for occasional speedbar use.
Perfect for Puffin, Kagoo2, the Spiruline…
To be used for Hike & Fly, Soaring, and local flight…
Light weight but no compromise on durability or comfort; 400gr without the Carabineers
Single size, for pilots from 160cm to 190cm
The leg pads are reinforced with a plastic sheet in order to spread the load evenly on the thighs of the pilot, allowing hours of soaring without any blood circulation problems.